Estimated receive power
Fiber link tool
Estimate the receive power of a passive fiber link and check it against your receiver’s operating range before you request a quote.
Estimated receive power (dBm) = Transmitter output (dBm) − Total path loss (dB)
Example values for a passive fiber link. Use the total path loss and the receiver’s operating limits at the same wavelength.
Describe one path from the transmitter to the receiver. The estimate uses typical values; the likely range allows for better or worse parts.
Count each joined pair of connectors once, such as at patch panels and splitter ports. Don’t count the plugs into the transmitter or receiver.
Each splitter output is its own link. Check your longest and your shortest leg.
For a 70/30 coupler or tap, enter the loss of the output you’re using, from its label or datasheet.
| Fiber | |
|---|---|
| Mated connections | |
| Fusion splices | |
| Splitter | |
| Other loss | |
| Estimated total | |
| Likely range |
You typed your own total, so this estimate isn’t being used. Change anything here to use it again.
| Item | Estimate | High end of range |
|---|
The likely range is the estimate plus or minus the difference between the two columns, and never below 0 dB. Splitter figures are vendor maximums without the splitter’s own connectors, so count those as mated connections. Sources: Fiber Optic Association loss-estimate guidance, TIA-568 limits (0.75 dB per connection, 0.3 dB per splice) and manufacturer datasheets for PLC splitters.
Estimates use typical values. Real links vary, so confirm with a power meter before final setup.
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}